6 Reasons Why Your Samsung Dryer Starts Taking Longer to Dry Clothes

Is your Samsung dryer taking too long to dry your clothes? You’re not alone. Many people are using the same model and running into the same issue. A dryer that takes too long can be annoying, but luckily there are some things you can try to get it back up and running at its best. Let’s look at six common causes for a slow-drying Samsung dryer. 

1. Lint Trap Blocked :

 The lint trap in your dryer should always be cleaned after each use, especially when drying heavy fabrics like towels or jeans. If the lint trap is clogged or blocked, it can prevent air from circulating and lead to clothes taking longer to dry. Clean out the lint trap and see if this helps with drying time. 

2. Exhaust Vent Clogged :

Your dryer needs an exhaust vent so that warm air can escape while drying clothes. If this vent is clogged with lint or debris, it can cause warm air to remain in the drum, making it take longer for clothing items to become fully dried. Check the exhaust vent and clean if necessary. 

3. Thermostat Issues:

The thermostat regulates the temperature of air entering the drum of your dryer, which affects how quickly clothes will dry inside the drum. If your thermostat is faulty or broken, it might not allow enough hot air into the drum, leading to longer drying times for clothes. Have a professional check out your thermostat if you suspect this is the problem causing slower drying cycles in your Samsung dryer. 

4. Timer Malfunction :

The timer on your Samsung dryer controls how long each cycle runs for as well as when to turn off or shut off when done drying clothes correctly and completely. If there is an issue with your timer such as a faulty part or wiring problem, then it could be causing any cycle to run longer than usual resulting in incompletely dried clothing items afterwards every time you use it . Have a professional inspect and repair any problems they find with the timer on your device if necessary . 

5 . Drum Not Spinning Properly :

Your Samsung dryer ’s drum needs to spin properly in order for clothes inside of it to get dried correctly . If something is wrong with either of these components , then it could be preventing the drum from spinning correctly , leading to longer drying times for any loads placed into it . Have a technician come out and inspect both components , repairing them if need be .   

6 . Wrong Settings :

Lastly , make sure you are setting up each cycle correctly before pressing start on your Samsung Dryer . If you have set up wrong settings such as selecting low heat instead of high heat , then this can result in slower drying times overall due to lack of proper hot air needed during cycles in order for them work correctly every time you use them . Double check all settings before beginning cycles on your device just in case something was accidentally changed by mistake previously before using again now 

Conclusion :

There are many reasons why a Samsung Dryer may take too long to fully dry clothing items within its drum during each cycle used . Luckily , most of these issues are easy enough for anyone at home without much experience needed beforehand in order diagnose and fix them by themselves . However , any repairs that require more technical skills such as working with wiring or parts should only be done by professionals. Call in our professionals today if you require a technical repair.